Miller Trailblazer 325, 907754002 Engine Drive, Mahany Welding Supply

Miller Trailblazer 325 EFI Welder 907754002

by Miller $7,209.00


 

Miller® Trailblazer® 325 Welder EFI with ArchReach®, Excel™ Power & GFCI 907754002

The Miller® Trailblazer® 325 EFI with ArcReach®, Excel™ Power & GFCI communicates directly with the remote Miller® ArcReach® wire feeder without the use of a remote control cable. The secret to this technology is built-in circuitry in both the Trailblazer 325 EFI ArcReach welder and ArcReach wire feeder that passes remote control signals through the welding leads, eliminating the need for costly remote control cables. ArcReach remote control distance is limited only by the length of your welding cable leads. ArcReach allows your MIG or Flux-Cored welding operation to take place further away from the welding power source and reduces downtime and costs by giving the operator full remote voltage and amperage control capabilities at the site of the weld without using expensive remote control cables. The Trailblazer 325 EFI ArcReach MUST be paired with a Miller ArcReach feeder to get the full benefits of this feature.

The Trailblazer® 325 EFI with ArcReach®, Excel™ Power & GFCI is the most fuel efficient gas engine welder/generator on the market. It is a 325 amp, 100% duty cycle DC welder and 12,000 watt AC generator. The Trailblazer 325 EFI features a Kohler 23 horse power, fuel injected engine with Miller's exclusive Auto-Speed™ technology. Auto-Speed® matches the engine speed with the welding load. This means that the engine can run at optimum RPM rather than full RPM while under load. This translates into reduced fuel consumption, quieter operation and longer engine life.

Excel™ Power provides 2,400 watts of generator power while the engine is at idle speed, resulting in dramatically reduced fuel costs. Excel Power reduces emissions, operating noise and extends run time hours. Two 120 volt duplex plugs with GFCI (Ground Fault Circuit Interruption) come as standard equipment. The Trailblazer® 325 EFI has the most smooth, stable welding arc in the business. It produces X-Ray quality welds whether you are using MIG, Stick or DC TIG welding processes.



Processes (X-Ray Quality)

  • Stick (SMAW)
  • MIG (GMAW)
  • Flux Cored (FCAW)
  • DC TIG (GTAW)
  • Air Carbon Arc (CAC-A) Cutting and Gouging (3/16 in carbons)
  • Air Plasma Cutting and Gouging with optional Spectrum models
  • AC Generator

    Applications
    Industrial Applications
    Fabrication
    Maintenance
    Repair
    Structural Steel Work
    Pipe
    Sheet Metal

    Features
  • Remote control of the power source without a cord - ArcReach™ technology uses the existing weld cable to communicate welding control information between the feeder and power source. This technology eliminates the need for control cords, and their associated problems and costs.
  • Excel™ Power - Excel power provides 120V, 60Hz of pure sine wave generator power at idle speed and while welding. When connected to the Excel power receptacle, you get up to 2400 watts of the cleanest generator power available. Plus, you can run most jobsite tools - like grinders, chop saws, drills and lights at idle speed, which provides:
    Exceptional fuel-efficiency
    Extended runtimes
    Quieter operation
    Longer engine life

  • EFI gas engine optimizes the air/fuel ratio for all engine speeds and engine loads, resulting in lower operational costs, fewer emissions, longer runtimes and better performance when compared to carbureted models. The payback from fuel savings alone is a matter of months. EFI will give you:
    Easy starts with no choke required
    Reliable operation, even with infrequent use - less prone to fuel deterioration
    Fuel efficiency - use up to 27 percent less fuel
    Fewer emissions - 27 percent less CO and 33 percent lower HC+NOx levels
  • Auto-Speed™ technology - Automatically adjusts the engine speed to run at lower speeds depending on the total power needed, resulting in:
    Exceptional fuel-efficiency
    Extended runtimes
    Quieter operation
    Reduced emissions
  • Designed for the professional welder - the Trailblazer® 275 delivers unbeatable arc performance in all weld processes, providing the smoothest, most stable arc in the industry.
  • Smart-Cor™ technology - Independent weld and generator power in an improved, more compact design.
    No interaction between jobsite tools and the welding arc, resulting in:
    Stronger, cleaner, more efficient generator power
    Reduced size and weight
    Improved arc performance
  • Innovative design - Engine is rotated to the front to create more efficient airflow, resulting in:
    Quieter operation
    Reduced size and weight
    Easier maintenance
  • Two 120 volt GFCI duplex receptacles come standard
  •  


     



  • This item ships Free via standard ground shipping within contiguous U.S.
  • Leave a Comment

    Latest News

    Mahany Welding Supply

    115 Fedex Way
    Rochester, NY 14624
    Ph: 585-352-8000