Miller Millermatic 125 Hobby MIG Welder 907692

Miller Millermatic 125 Hobby MIG Welder 907692

by Miller $549.00


Millermatic® 125 Hobby MIG Welder with Auto-Set 907692

The Millermatic® 125 Hobby MIG welder is an entry level MIG welder with the quality and features of a Miller machine. The 125 Hobby is a 130 amp portable MIG welder that runs on standard 120 volt household current. It features Auto-Set, which eliminates the guesswork of setting voltage and wire feed speed for your MIG welding application. Simply select the material thickness and wire diameter while the welder is in the Auto-Set mode, and you are ready to weld. The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).

Manual MIG welding control is also available for those welders who wish to fine tune their welding arc. Manual welding mode must also be used when MIG welding aluminum, stainless steel or for flux-cored welding. The parameter door chart lists voltage and wire feed speed settings options.

The Millermatic 125 Hobby's cast aluminum wire drive system, factory installed gas solenoid and thermal overload protection are standard features typically found in welders costing hundreds of dollars more. The 125 Hobby also comes with Miller's True Blue® three-year warranty.



Processes
  • MIG (GMAW)
  • Flux Cored (FCAW) (gas and self-shielded)

    Applications
    Light Industrial Applications
    Light Fabrication
    Farm/Home



    Features:
  • Auto-Set™ automatically provides the right settings to MIG weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters.
    Set the wire diameter, a blue light shows Auto-Set is activated
    Dial in the thickness of what you are welding
    Start welding with the exact parameters you need!
  • Cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up.
  • Factory-installed gas solenoid makes it easy to switch between MIG welding and flux-cored wire.
  • Quick Select™ drive roll makes setup quicker by offering three grooves, two for different size solid wire and a third for flux-cored welding wire.
  • Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools.
  • Uses 4 inch or 8 inch (102 or 203 mm) spools and can be set up to weld with .024 to .030 inch (0.6 to 0.8 mm) solid wire and .030 to .035 inch (0.8 to 0.9 mm) flux-cored wire.

    Specs



    Comes complete with:
  • Millermatic® 125 MIG Welding Power source Power cord with plug
  • 8 ft. (2.4 m) M-80 MIG gun and cable assembly
  • 8 ft. (2.4 m) work cable with clamp
  • Argon and AR/CO2 mix flow gauge regulator with gas hose
  • Hobart® spool of .030 in. (0.8 mm) solid wire
  • Two contact tips for .030 in. (0.8 mm) wire
  • Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
  • Material thickness gauge


  • Leave a Comment

    Latest News

    Mahany Welding Supply

    115 Fedex Way
    Rochester, NY 14624
    Ph: 585-352-8000