**** Price after Mail-in-Rebate is $3199.00 ****
Miller Dynasty® 210 CPS TIG Welder 907685002
Miller Dynasty® 210 CPS is a 210 amp AC/DC TIG welder that comes complete with a dedicated power receptacle for the Miller Coolmate™ 1.3 water cooler. It can weld up to 1/4 inch thick aluminum and 1/4 inch thick steel. The Dynasty 210's inverter design makes this welder compact and lightweight (only 50 pounds). The 210 CPS features user-friendly weld control interface and comes complete with memory card expansion slot for maximum flexibility and expand-ability.
Miller's Autoline™ automatic input voltage sensing allows the Dynasty 210 CPS to be hooked up to 120 volt to 480 volt, single phase or three phase, input power without manual linking. The Miller Dynasty® 210 CPS TIG welder provides the basic features that are required for most AC/DC TIG or STICK welding applications, including pulsed DC TIG welding and provides operator-friendly, menu-driven features.
TIG (GTAW) DC
TIG (GTAW) AC
Pulsed TIG (GTAW-P) DC
Stick (SMAW) DC
Stick (SMAW) AC
Update and expand. Front panel memory card data port provides the ability to easily update software and expand product features.
Pro-Set™ eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. Simply select the feature and adjust until Pro-Set appears on the display.
Sleep timer conserves electricity. This programmable feature will power down the machine if it sits idle for a specified time.
Meter calibration allows digital meters to be calibrated for certification.
Cooler Power Supply (CPS) is an integrated 120-volt dedicated-use receptacle for the Coolmate™ 1.3 water cooler.
Cooler-On-Demand™ feature operates the auxiliary cooling system only when needed, reducing noise, energy use, and airborne contaminants pulled through the cooler.
Fan-On-Demand™ cooling system only operates when needed.
Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Lift-Arc™ start provides TIG arc starting without the use of high frequency.
Wind Tunnel Technology™ is an internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.
LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power +/- 10%.
Squarewave technology is the AC output of a power source that has the ability to rapidly switch between the positive and negative half cycles of alternating current.
Thermal Overload Protection - Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
Wireless remote compatible - fully compatible with Miller wireless remote control solutions — so you can work the way you want
AC TIG Features
Blue Lightning™ - High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.
Extended AC Balance (60-80%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
AC frequency (70-150 hz) controls the width of the arc cone and the force of the arc.
Soft squarewave waveform for a soft buttery arc with maximum puddle control and good wetting action
DC TIG Features
Exceptionally smooth and precise arc for welding exotic materials.
Stick Features (AC/DC)
DIG control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010.
Hot Start™ adaptive control provides positive arc starts without sticking.
AC frequency control adds stability for smoother welds when AC Stick welding.
Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.
Comes complete with
Dynasty 210 CPS TIG Welder
Cooler Power Supply dedicated use receptacle for Coolmate™ 1.3
Quick Reference Guide (English)
Adjustable shoulder strap
8 ft (2.4 m) primary cord
(2) Dinse 50-mm male connectors
Get a $500 online, cash back Build With Blue™ Summer Savings rebate from Miller with the purchase of a Dynasty® 210 TIG welder. Earn up to $200 MORE in rebates when you purchase additional Miller or Hobart branded products. Rebate application instructions included with order. Additional products must be purchased on the same order as welder. Expires 9/30/17.