ESAB Rebel EMP 235ic MIG/TIG/Stick Welder With Cart 0558012704

ESAB Rebel EMP 235ic MIG/TIG/Stick Welder With Cart 0558012704

by ESAB $2,725.00

Receive an additional $200 in savings from ESAB's Mail In Rebate!

ESAB® Rebel™ EMP 235ic MIG/TIG/Stick Welder with Cart 0558012704

The ESAB® Rebel™ EMP 235ic with cart is a 250 amp MIG, DC TIG, and Stick welder that can weld up to 1/2 inch plate. It operates off of standard household 120 volt OR 230 volt input power and weighs only 53 pounds. It comes complete with everything you need to start MIG or Stick welding, except the shielding gas. It is capable of DC TIG welding with OPTIONAL TIG torch. The Rebel 235ic EMP accepts 4 inch (2 pound), 8 inch (10 pound) and 12 inch (33 pound) spools of MIG welding wire.

Rebel's advanced, welder-inspired design sets it apart from all other multiprocess welders on the market. ESAB starts with sMIG technology that actually adapts the MIG arc characteristics to your unique welding style. Should you change your technique while welding, sMIG will automatically adjust on the fly. The 235ic has exceptional lift-arc DC TIG performance down to 5 amps. Smooth, stable Stick welding arc performance is consistent even on difficult-to-weld E6010 and E7018 electrodes. Combine all of this with a bright, bold 4.3 inch LED color display and you've got a go anywhere, do anything multiprocess welder that is second to none.

Processes

  • MIG (GMAW)
  • Flux Cored (FCAW)
  • STICK (SMAW)
  • DC TIG (GTAW) (with OPTIONAL TIG torch)

    Applications
    General Fabrication
    Maintenance & Repair
    Construction
    Mechanical Contractors
    Automotive and Restoration
    Farm & Ranch
    HVAC
    Training Schools



    Features
  • MULTI-PROCESS MIG, Flux-Cored, DC TIG, & Stick
    Professional-grade MIG performance, including flux-cored with wires up to .052 inch diamter
    Exceptional Lift Arc DC TIG performance down to 5 amps
    Excellent Stick performance, including 6010/6011 cellulosic and 308L electrodes up to 5/32 inch diameter
    Compatible with OPTIONAL spool gun for welding aluminum
  • Rebel Cart with single cylinder rack provides unmatched portability. The Rebel 235ic latches into the custom cart for easy shop transport or quickly detaches so that the welder can go wherever it is needed.
  • POWER TO PERFORM – have the confidence with Rebel 235ic to run the full range of .035 in. (0.9 mm) wire – short arc and spray transfer. Also up to .045 in. (1.2 mm) solid wire and up to .052 in. (1.4 mm) cored wire. Plus, stick electrodes up to 5/32 in. (4.0 mm) and TIG rods up to 3/16 in. (5.0 mm)
  • NEVER-BEFORE-SEEN sMIG TECHNOLOGY
    Exclusive, built-in dynamic arc control that constantly monitors complex arc characteristics adapting to your technique to provide a smooth, stable arc and superior, repeatable welds
    Produces less spatter and weld defects
    Two modes – basic and advanced - Basic mode reduces the MIG learning curve: set wire diameter and material thickness and you’re ready to weld. Advanced mode gives full control to adjust the arc characteristics to your liking
  • DUAL VOLTAGE
    Runs on 120V–230V single-phase input power (adapter included)
    Top-level performance across all processes – even on 120V power
    Auto-detect knows what type of input power the machine’s connected to
    Runs off a 3.7 kVA (120V) or 7.5 kVA (230V) generator



  • LARGE, 4.3-INCH COLOR SCREEN
    Intuitive LCD/TFT display
    Well protected by front handles and a hefty composite bezel
    Easily switch from one process to the next
    Built-in on-screen manual, spare parts listing, and welding parameters guide
    Multi-lingual capabilities, including English, French, and Spanish
  • RUGGED CASE DESIGN
    Four-handle roll cage for easy transport and handling
    Steel unibody housing for increased protection and superior durability
    Recessed body panels for increased strength



    NOTE: The Rebel EMP is a DC TIG welder only. It CANNOT TIG weld aluminum.

    Comes complete with
  • ESAB® Rebel™ EMP 235ic MIG/TIG/Stick welder
  • Rebel Cart with single cylinder rack
  • 15 ft.Tweco® SprayMaster 250 MIG gun
  • Victor® argon flowmeter regulator
  • 12.5 ft. (3.8 m) gas hose
  • Electrode holder with leads
  • Ground clamp with leads
  • 4 Drive rolls: .024-.030 smooth (solid wire), .035-.045 smooth (solid wire - installed), .030-.035 knurled (flux-cored wire), .045 knurled (flux-cored wire)
  • 2 extra contact tips .035 in. (0.9 mm) wire
  • 1 extra MIG nozzle
  • 120V/230V power adapter
  • ESAB Atom Arc 7018 electrodes
  • Operator’s manual


    ESAB’s industry-leading service and support means that if you do need help, you’ll be protected by the most comprehensive warranty in the business.

    100% SATISFACTION GUARANTEE. If there’s anything – and we mean anything – you’re not completely happy with in your first 100 days with your machine, ESAB will make it right, or your money back.

  •  

    Leave a Comment

    Latest News

    Mahany Welding Supply

    115 Fedex Way
    Rochester, NY 14624
    Ph: 585-352-8000